22 PIN PICBASIC MODULE

PICBASIC2000 series
PICBASIC2000 is single board controller, which is programmable in PICBASIC language instead of C/Assembly language commonly used in programming microprocessors. PICBASIC language supports not only basic instructions such as IF, THEN, GOTO, FOR and NEXT etc but also dedicated instructions such as ADIN, PWM, SEROUT, LCDINIT etc. PICBASIC2000 has several advantages over all previous PICBASIC. It has faster execution speed, larger program memory and easier debugging method. It also has lots of new features in hardware such as 34 I/O lines, 64K FLASH, 8¡32K RAM, 8¡32 EEPROM, AD/DA converter, PWM output, Real Time Clock (RTC), full-duplex RS232C, SIN/COS operations etc. PICBASIC studio is Integrated Development Environment for PICBASIC modules (including PICBASIC2000). You can edit/download/emulate your source program in environment of PICBASIC studio through parallel communication with ease. It is compatible with all MS Windows family and provides interface similar as common word processors. After downloading your source program into PICBASIC module, it operates in stand-alone because that the downloaded source program is stored in EEPROM inside of PICBASIC module. EEPROM can retain its contents without electric power.
	Click here to see PICBASIC introduction & Online databook.

40 pins PICBASIC2000 module

- Bidirectional I/O port: 32
- Program memory: 64K byte
- Data memory: SRAM 8K,EEPROM 8K
- Clock: 20 MHz
- Built-in 10bit-A/D converter: 8 channels
- 8 bit-D/A converter: 16 channels (DACOUT)
- Hardware 10bit-PWM output: 2 : hardware
- Full-duplex buffering RS232C port
:Receiving interrupt is available
- 40 pins DIP type plastic package
[Dimension]

40pins PICBASIC2000 module

- Bidirectional I/O port: 34
- Program memory: 64K byte
- Data memory: SRAM 32K, EEPROM 32K
- Clock: 20MHz
- Built-in 10bit-A/D converter : 8 channels
- Built-in 12 bit-A/D converter : 2 channels
- 8 bit-D/A converter: 16 channels (DACOUT)
- Hardware 10bit-PWM output: 2
- Built-in RTC and Super condenser
- Full duplex buffering RS232C port
: Receiving interrupt is available
- 40 pins DIP type plastic package
[Dimension]

40pins PICBASIC module

- Single chip controller in PICBASIC
- IDE compatible with MS Windows
: PICBASIC studio
- 3 lines connection to parallel port of PC
- 8 bit-PWM output: 2³
- 29 channels of RS232C are available
- 10bit-A/D converter
- 16 bit-counter input port
[Dimension ]

28 pins PICBASIC module

- Single chip controller in PICBASIC
- IDE compatible with MS Windows
: PICBASIC studio
- 2 lines connection to parallel port of PC
- 8 bit-PWM output: 2
- 18 channels of RS232C are available
- 10bit-A/D converter
- 16 bit-counter input port
[Dimension ]

22 pins PICBASIC module

- Bidirectional I/O port: 16
- Program memory: 2K byte
- Data memory: 96 bytes
- 8 bit-A/D converter: 5 channels
- 8 bit-PWM output: 2
- 16 channels of RS232C is available
- 22 pins SIP package
[Dimension]

22 pins PICBASIC module

- Bidirectional I/O port: 16
- Program memory: 4K byte
- Data memory: 96 bytes
- 8 bit-A/D converter: 5 channels
- 8 bit-PWM output: 2
- 16 channels of RS232C is available
- 22 pins SIP package
- 4.19MHz of system clock
[Dimension]

34 pins PICBASIC module

- Bidirectional I/O port: 27
- Program memory: 8K byte
- Data memory: 96 bytes
- 8 bit-A/D converter: 8channels
- 8 bit-PWM output: 2
- 27 channels of RS232C is available
- 34 pins DIP package
- 4.19MHz of system clock
[Dimension]

34 pins PICBASIC module

- Bidirectional I/O port: 27
- Program memory: 16K byte
- Data memory: 96 bytes
- 8 bit-A/D converter: 8channels
- 8 bit-PWM output: 2
- 27 channels of RS232C is available
- 34 pins DIP package
- Counter input: 16 bit
- 20 MHz of system clock
[Dimension]

PICBASIC USB Download Cable

- Dedicated cable for PICBASIC module
- Available with both PB and PBM series